Technical Specifications
Product | Water and Fertilizer Control System |
Model | Fortop 3 |
Protection Level | IP20 |
Operating Temperature | 0~50degrees Celsius |
Operating Humidity | ≤90%,non-condensing |
Operating Voltage | DC110V-230V |
Operating Current | ≤50mA(no sensors, devices connected) |
Power Adapter Input | DC24V,2A,Interface:DC005-2.5 |
Screen | 5 inch LCD monitor,Resolution:800*480 |
Network Port | RJ45 |
NC/NO Port | Dry Contact Alarm Output,Load Voltage: ≤30V; Load Current : ≤1A |
Sensor Port | RJ12,6P6C,RS485 Output Voltage:24V,Output Current:0.5A |
Adapter Port | RJ12,6P6C,RS485,Output Voltage:24V,Output Current:0.5A |
Light Controller Port | RJ12,6P6C,RS485,Output Voltage:24V,Output Current:0.5A |
Number of sensors connected | The total number does not exceed 6, and the total current does not exceed 0.5A, which can be connected Four-in-one sensor BLS-4 (current limit, the number does not exceed 10)水water level sensor BLS-SD Smoke dector BLS-SD water leak sensor BLS-WD Water level sensor BLS-WL-S |
Number of devices connected | The total number does not exceed 6, and the total current does not exceed 0.5A (when the power consumption of the device may exceed 0.5A, the device needs to have its own power supply)
AC Remote Station (BTS-AR)、 CO2 Device Station ,PPM Up (BCS-PU1) CO2 Device Station ,PPM Down (BCS-PD1) Program Device Station (BPS-1) Dry Contact Station (BDC-12) Dry Contact Station (BDC-4) Smart Socket 120-240V (BSS-4) RS485 Converter (BRC-1) |
Number of light controller connected | up to 2 Light Adapter (LDA-1),or 1 LDA-SPE. |
Communication parameters | RS485 host, baud rate 9600, no parity, 8 data bits and 1 stop bit |
Certification | ETL,FCC,CE |